Tag: Failed

04
Oct
2020
Posted in software

Windows failed to start; Hardware or software change might be the cause

Windows can stop working, in fact, fail to start because of any hardware and software change. These changes interfere with the regular boot process, and the bootloader becomes clueless. When that happens, it becomes painful because you can get access to it. In this post, we will try to resolve the problem with the troubleshooting tips.

Windows failed to start. A recent hardware or software change might have

Windows failed to start; A recent hardware or software change might be the cause

The problem is usually with the missing bootloader or connected hardware. You will need to make a bootable USB drive to boot into advanced recovery. Since you cannot access your computer, you can use another Windows 10 PC to create the bootable disk. The options you have are:

  1. Check Hardware
  2. Automatic Repair
  3. Rebuild BCD
  4. Set Correct Boot Order

You will also need an admin account in one of the processes so make sure you remember that.

1] Set Correct Boot Order

Change Boot Order in Windows 10

When Windows starts, the bootloader looks for a set of files from where it can start loading Windows. If it will not find the right files, Windows will not load. You need to make sure that the default bootable drive is your SSD or HDD. When it’s not set as default, and you have a USB drive connected, Windows will be stuck. So boot into the BIOS using DEL or F2 key when you power up the computer, and change the order.

2] Check Hardware

If there is no Boot Order problem, you can check if there is an issue with the Hard drive. The first thing you should check the BIOS can detect it. If it does, then you need to check it with another computer. If the hard drive or SSD cannot be recognized, you have a hardware issue.

In case you are facing this on a

01
Oct
2020
Posted in technology

Huawei Has Failed To Resolve Security Flaws, U.K. Government Report Says

Topline

Huawei has failed to adequately resolve security flaws in the equipment used by the U.K. telecom networks, the British government’s cyber-spy agency said in an official report released a few months after the Chinese telecom equipment-maker was barred from the country’s 5G mobile networks over security concerns.

Key Facts

The report, prepared by a U.K. government board led by a member of the cyber-intelligence agency Government Communications Headquarters (GCHQ) found that there had been no evidence that the Chinese firm has made a significant shift on the matter, the BBC reported.

The report added that while some improvements were made by Huawei, the board could only provide “limited assurance that all risks to UK national security” could be mitigated in the long-term.

The U.K. government had initiated a review of Huawei’s network equipment after the U.S. government issued sanctions against the company in May restricting it from sourcing key components from American suppliers.

Following the sanctions, Britain’s National Cyber Security Centre had determined that Huawei’s equipment could no longer be considered safe as it had to rely on non-US components.

The Trump administration has cracked down on Chinese tech firms over security concerns within the U.S. while also engaging in diplomatic efforts to pressure European governments to bar Huawei devices from being used in their 5G networks.

Big Number

£2 billion. That is how much the ban on Huawei would cost the U.K government, as the move would result in a delay of up to three years in the country’s planned 5G rollout, Culture Secretary Oliver Dowden had told the British parliament.

Tangent

Germany is set to impose new restrictions on telecom equipment providers which would effectively prevent Huawei’s devices from